离心风机的操作规程有哪些？安全规程又有哪些？这也是每个使用者所关心的问题。
What are the operating procedures for centrifugal fans? What are the safety regulations? This is also a concern for every user.
一、离心风机的操作规程
1、 Operating procedures for centrifugal fans
1.运转前的检查
1. Inspection before operation
(1)检查轴承润滑情况良好，离心风机内无异物；
(1) Check that the bearing lubrication is in good condition and there are no foreign objects inside the centrifugal fan;
(2)检查各手动、电动挡板是否灵活；
(2) Check whether each manual and electric baffle is flexible;
(3)检查各螺栓是否紧固、脱落；
(3) Check whether each bolt is tightened or detached;
(4)确认轴承冷却水是否畅通。
(4) Confirm whether the bearing cooling water is unobstructed.
2.运转中的检查
2. Inspection during operation
(1)检查电机运转是否平稳，是否有异音、异振、异温、异味；
(1) Check whether the motor runs smoothly and whether there are any abnormal sounds, vibrations, temperatures, or odors;
(2)检查轴承温度、油量、冷却水是否正常；
(2) Check whether the bearing temperature, oil quantity, and cooling water are normal;
(3)检查风机运转是否平稳，是否有异音、异振；
(3) Check if the fan operates smoothly and if there are any abnormal sounds or vibrations;
(4)检查出口风管是否因开裂而导致漏风；
(4) Check if the outlet air duct is leaking due to cracking;
(5)检查各人孔门是否密封好；
(5) Check if the manhole doors are properly sealed;
(6)检查挡板显示是否与中控显示一致；
(6) Check whether the display of the baffle is consistent with the display of the central control;
(7)检查螺栓是否松动、脱落。
(7) Check if the bolts are loose or detached.
3.日常维护与保养
3. Daily maintenance and upkeep
(1)检查风机叶片磨损情况，清理叶片上的积灰；
(1) Check the wear of the fan blades and clean the accumulated dust on the blades;
(2)清洗轴承，检查轴承润滑脂、润滑油，并及时补充、更换；
(2) Clean the bearings, check the lubricating grease and oil of the bearings, and timely supplement and replace them;
(3)检查风机内是否有杂物，关闭人孔门并密封好；
(3) Check if there are any debris inside the fan, close the manhole door and seal it properly;
(4)检查各螺栓是否松动、脱落，并及时紧固、更换。
(4) Check whether each bolt is loose or detached, and tighten and replace it in a timely manner.